Last updated on February 21st, 2019
One of the most advanced refillable all-in-one vape pod pen is the CT1. Designed by Next Mind, this ultra portable mini vaporizer has features never before offered an open-system vape pod device.
Not only is the atomizer coil replaceable, it can be cleaned with the touch of a button. These are just two of the unique features that make this mini vape a game-changer in its class.
This review will cover the CT1’s product design, unique features, and of course the model’s Pros and Cons.
The CT1 Pod Vape Pen At a Glance
Overall, this pretty little vape pen has many features vapers have been waiting for in an AIO pod vape. Features include the ability to clean and replace the atomizer without having to buy a whole new tank. It is a bit heavier than other mini vapes, but the CT1 is easy to set up and use.
Update! At the time of this post’s update, we’re suspecting the CT1 may be discontinued, or pricing may have changed but you can…
THE DESIGN OF THE CT1
The CT1 is quite small and stealthy at just 3.7” x 1.0” x 0.8”. Despite the weight, I like the fact that the large 650 mAh battery holds a decent charge for such a small device.
The mouthpiece is smooth plastic, which means no sharp edges and no cold metal against your lips.
If you need to remove the tank for travel, you can seal it with the tank plug so there’s no leaking.
The CT1’s tank also allows you to view your e-liquid level easily, as the entire tank is in full view. It views best when you hold it in front of a light or computer screen.
Right now you can choose one of two pen colors, blue or black.
When you get your CT1 kit here’s what you’ll receive:
The Next Mind CT1 Device which includes:
(1) 3.6ml Tank
(1) 650 mAh battery,
(1) 1.0 Ceramic Replacement Coil
(1) 1.2 ohm Ceramic Replacement Coil
(1) Silicone Tank Fill Port Seal (attached to tank)
(1) Micro USB Charging Cable
(1) Quick Start Guide
(1) User Manual
(1) Certificate of Passed Inspection
SETTING UP THE CT1
1- The first step in setting up your CT1 is to check out the quick start card and the manual.
Here are the next steps with my comments to make things even easier.
2- Your CT1 comes 90% charged, but it’s a good idea to put it on the charger for another hour before you use it.
3- When you’re ready to vape, choose your preferred replacement coil, either the 1.0 ohm coil or the 1.2 ohm coil. There really isn’t much difference between these two high resistance coils. They will both give you a nice, flavorful vape that’s cool, not hot.
I had to put on my glasses to read which coil was which, but the one with the red bands is the 1.0 ohm coil and the one with the blue bands is 1.2 ohms.
4- Remove the tank from the plastic bag. Before you can fill the tank, you have to twist off the plastic tank plug. Twist it firmly counter clockwise and remove it. Don’t throw it away – you’ll need it to store your tank or to travel with it.
5- You’ll see a little red silicone stopper plug covering the e-liquid chamber. When you open it, do it carefully because there’s a thin silicone tether that might snap if you pull the cover off too aggressively.
6- Fill the tank (slowly) with your favorite e-liquid. 50/50 PG/VG blends or those with a higher PG work best with the coils provided in your kit. High VG e-juice will work too, but you’ll gunk up the coils pretty quickly.
Make sure you don’t overfill the tank. When it’s filled, replace the stopper.
7- Next, insert one of the replacement coils provided into the top of the battery (not into the tank). I know it seems weird, as most vaporizer tanks hold the coils. Not with the CT1…it goes on the battery.
Push the coil down into the battery hole so the bottom colored band enters into the hole. Then give it turn counterclockwise. Some find this the most difficult part of the set up because it takes some strength and the coil is very tiny.
8- Now that you’ve filled the tank and inserted the coil, attached the tank to the battery. The little tank posts fit into the battery slots. Twist the tank counterclockwise to lock it in.
EASY PRIME TIME
There is a bit of priming you’ll have to do before you can vape; however, unlike traditional vaporizers there’s no hassle priming the CT1’s coil.
All you have to do is to take 5 -10 short inhalations. When the tank is primed, the vapor will start to flow. It took only 7 draws for me to experience smooth, full vapor.
CT1’S OTHER UNIQUE FEATURES
- DUAL Activation Modes
The CT1 is automatically activated as you draw. No buttons to push. That said, the kit indicates that the CT1 has dual activation modes. That basically means you can hold down the activation button when you draw, or you can forget the button and simply draw.
There are no instructions on setting a preferred mode, so I find that feature rather silly. Either method works and there’s no difference in vapor production.
Button activation is often preferred for child proofing a device. I’m surprised Next Mind made the tank child proof with it’s lock-in-place design, but they did not include a “turn off auto-draw” feature.
- A Bit Slow to Draw
Once you’ve activated the CT1 and continue to vape, don’t expect to get an easy, quick draw on all puffs. I had to take pretty deep breaths to get full vapor. I was vaping one of Hot Juice’s 70PG/30VG e-liquids, but I suspect the draw would be similar with any e-liquid.
After several puffs the draw did become easier. I thought the delay was due to the atomizer getting fulling primed, however, I experienced slow draw again at the start of a new vaping session
- Self-Cleaning Mode
To date, there’s no other vape pod pen that has a self cleaning mode. Next Mind’s CT1 device is the first to offer this feature and it may be unreliable at times. Mind you, you still have to clean the plastic tank every so often.
NOTE: The CT1 tank is plastic, not glass. That means it’s harder to completely remove all traces of your previous e-liquid when you clean your tank and you’ll probably still smell the flavor. “Flavor ghosting” can occur when you refill the tank with a different flavored e-juice, so I recommend getting an additional CT tank which is both practical and economical.
As for the coil self-cleaning mode feature, it works great and is easy to activate, but the manual was clearly not written by someone fluent in the English language. (The product is made in China). Since I have tested the feature successfully, I’ve rewritten the instructions as follows:
Step 1 – Remove the tank by turning it 60-80 degrees counterclockwise and pulling it off the battery. Get the tank plug that came with the kit, and screw it onto the bottom of the tank to keep it safe. Set the tank aside.
Step 2 – To activate the self-cleaning function, press the button on the battery 8 times within a 3 second period. The RED indicator light will blink for 30 seconds within this part of the cleaning period. You will see a bit of vapor smoke as the coil burns off the e-liquid residue.
Step 3 – Repeat Step 2 until there is no vapor coming off the coil. It’s recommended that you blow on the coil to quicken the process of evaporating the residue.
Caution: Do not touch the coil with your hand or put it in your mouth during the cleaning procedure! The coil gets very hot.
Step 4 – Install the tank as before and enjoy your vape.
You’ll want to clean your tank this way every time you change out your e-liquid, or after 10 days of use. It’s the best way to avoid any lingering flavors and to keep things sanitary.
Wrapping Up This Review and How To
The CT1 Pod Starter Kit by Next Mind has more features than any other portable vape pod mod. It has the features of it’s strongest competitor, JUUL plus a few extras like the self-cleaning mode and the replaceable coil – both of which can make the CT1 more economical.
Since this vape pod is an open system, you can use your own e-liquid flavors and choose your own nicotine and PG level.
With the CT1 you only have to buy new coils, not new pods that come pre-filled with the company’s own e-liquids. While pre-filled pods are a convenience for many vapers, they can be expensive.
I really liked the CT1 when I tested it out, but after a while I got a burnt taste. Also, inserting the tiny coil can be a challenge for some. I’m not bothered by the weight of the device as it’s still quite portable.
Best E-Cigarette Guide’s Rating for the CT1 Vape Pod Kit
I suggest you check out our Review of the Smoke NORN which is a better vape pod mod; comparable in size and has some unique atomizer features!